CSMA/CD stands for Carrier Sense Multiple Access with Collision Detection. It refers to the means of media access, or deciding "who gets to talk" in an Ethernet network.
A more elegant term for "who gets to talk" is to refer to the "media access method", which, in this case, would be "CSMA/CD"
Carrier Sense means that before a station will "talk" onto an Ethernet wire, it will listen for the "carrier" that is present when another station is talking. If another station is talking, this station will wait until there is no carrier present.
Multiple Access refers to the fact that when a station is done transmitting it is allowed to immediately make another access to the medium (a 'multiple' access). This is as opposed to a Token-Ring network where a station is required to perform other tasks in-between accessing the medium (like releasing a token or sometimes releasing a management frame).
Collision Detection refers to the ability of an Ethernet adapter to detect the resulting "collision" of electrical signals and react appropriately. In a normally operating Ethernet network, it will sometimes occur that two stations simultaneously detect no carrier and begin to talk. In this case the two electrical signal will interfere with each other and result in a collision; an event which is detected by the Collision Detection circuitry in the transmitting network interface cards.
The process of CSMA/CD is implemented slightly differently in a twisted pair (as opposed to a coaxial) Ethernet network.
For the latest information on our products and services please go to our new site at www.savvius.com.
We are in the process of migrating some of our legacy content to our new site, so Wildpackets.com is still available. If the content you are looking for has already been migrated we will automatically redirect you.