print

Supported Hardware

Ethernet

OmniPeek will run with a NDIS 3 or higher compatible Ethernet, Fast Ethernet, or Gigabit promiscuous mode network adapter. Promiscuous mode is the ability to have OmniPeek take over the driver and put it into a mode that will allow it to passively capture all packets on an Ethernet wire, regardless of the address to which they are being sent/received.

For example, we are compatible with adapters from 3Com, Intel, Xircom, SMC, and many others.

Full-Duplex Gigabit

The OmniAdapter is a PCI-X card that supports up to 2 full-duplex or 4 half-duplex connections. Taking advantage of a PCI-X bus that clocks up to 133 MHz, the OmniAdapter provides high-performance connectivity for monitoring and troubleshooting Gigabit networks. OmniAdapter can be configured during manufacturing to support multiple configurations of SX, LX, ZX or copper (Ethernet).

OmniAdapter is available in 4 different configurations:

• 4 ports of SFP cages
• 4 ports of RJ45 Ethernet
• 2 RJ45 Ethernet and 2 SFP cages
• 1000Base-SX or 1000Base-LX Optical Ethernet or 1000Base-T Ethernet using modular transceivers

For more information about OmniAdapter, please visit the OmniAdapters Product Page.

10 Gigabit:

WildPackets’ OmniAdapter 10G is a high performance, full-duplex 10 Gigabit Network Analyzer Card with 2x10 Gbit/s optical interfaces that has been optimized for monitoring and troubleshooting traffic on 10 Gigabit Ethernet network. The two-port, OmniAdapter 10G provides hardware accelerated packet tracing and dynamically configurable filtering together with high precision timestamping. The network adapter is based on the industry standard PCI-X interface and available with 1x850nm MFF XFP or; 1x1310nm SMF XFP optical transceivers with LC connectors.

One-port, OmniAdapter 10G is also supported by WildPackets’ OmniPeek Product Family. It’s available in PCI-X or PCI-E with 1x850nm MFF XFP or; 1x1310nm SMF XFP optical transceivers with LC connectors.

WildPackets also offers Intel Pro/10GbE adapter cards to capture 10 Gigabit traffic. The Intel Pro/10GbE cards are an excellent, cost-effective solution for those who want to connect to SPAN or mirror ports.

They are available in 3 different configurations:

• Intel® PRO/10GbE CX4 Server Adapter : 64-bit PCI-X interface running up to 133 MHz with 10GbE-over-copper connection.
• Intel® PRO/10GbE SR Server Adapter : - 64-bit PCI-X interface running up to 133 MHz with 10 Gigabit Multi-mode Fiber Server Connection.
• Intel® PRO/10GbE LR Server Adapter : 64-bit PCI-X interface running up to 133 MHz with 10 Gigabit Single-mode Fiber Server Connection.

For more information, please visit the OmniAdapters 10G Product Page.

WAN

OmniPeek provides support for PCMCIA T1/E1 (WAC PCMCIA T1/E1).

The WAC PCMCIA T1/E1 is a Type 2 PCMCIA card that fits in any laptop or portable computer with PCMCIA support. It captures at line rate full-duplex T1/E1 speeds.

For more information WAC PCMCIA T1/E1, please visit the WAC Product Page.

Wireless

For wireless packet capture, OmniPeek requires the installation of a special driver corresponding to the supported wireless network adapter. WildPackets has tested Marvell-based, Atheros-based and Intel Centrino 3945-based cards for wireless capture. Other wireless cards may work with this version to the same degree that they worked in prior versions; however, these cards are not recommended. For more information and to download wireless drivers, please visit: OmniPeek Enterprise Wireless Drivers Page.

For ordering and pricing information, please contact sales@wildpackets.com.

Error capture using OmniPeek Enterprise