MyPeek
WPDN
Partners Login
Worldwide Sites
OmniPeek Enterprise
OmniEngine Enterprise
OmniPeek Professional
OmniPeek Basic
OmniEngine Desktop
OmniVirtual
Omnipliance
Omnipliance Portable
Supported Hardware

Supported Hardware

OmniAdapters

The OmniAdapter is a PCI-X card that supports up to 2 full-duplex or 4 half-duplex connections. Taking advantage of a PCI-X bus that clocks up to 133 MHz, the OmniAdapter provides high-performance connectivity for monitoring and troubleshooting Gigabit networks.

The OmniAdapter is available in four different configurations with interchangeable SFPs or fixed 10/100/1000 RJ45 connectors:

  • Four SFP cages
  • Four RJ45 10/100/1000Base-T ports
  • Two RJ45 10/100/1000Base-T ports and two SFP cages
  • Four SFP cages for 1000Base-SX or 1000Base-LX optical Ethernet, and one RJ45 port for 1000Base-T copper

Other supported Gigabit and 10G Network Adapters

  • Intel® Pro/1000 GT Quad Port Server Adapter.
  • Intel® PRO/10GbE CX4 Server Adapter: 64 bit PCI-X interface running up to 133 MHz with 10GbE-over-copper Connection.
  • Intel® PRO/10GbE SR Server Adapter: 64 bit PCI-X interface running up to 133 MHz with 10 Gigabit Multi-mode Fiber Server Connection.
  • Intel® PRO/10GbE LR Server Adapter: 64 bit PCI-X interface running up to 133 MHz with 10 Gigabit Single-mode Fiber Server Connection.
Download a demo of OmniPeek
Custom Integration & Engineering
WildPackets understands that one size does not fit all. Moreover, we all face new challenges every day. WildPackets Custom Engineering performs software development and systems integration, complementing WildPackets products and enhancing the capabilities of Network Operations Centers.
Learn more...

Network Analysis & Consulting
WildPackets offers a full spectrum of professional services, available remote and on-site. Our network engineers provide expertise for your network troubleshooting, capacity planning, or baseline performance analysis needs.
Learn more...

Tip of the Month
Time to ‘Select’
This month I’m going to address the need of being able to actively select certain packets from an active capture. This occurs when you have an active capture running, which you cannot stop for whatever reason, but you wish to apply a filter to it.
COPYRIGHT © 2008 WILDPACKETS, INC   —   PRIVACY STATEMENT · CONTACT US CORPORATE  ·  PRODUCTS  ·  SOLUTIONS  ·  SERVICES  ·  SUPPORT  ·  PARTNERS  ·  BUY NOW
All registered and unregistered trademarks are the sole property of their respective owners